UVCare Super Power UV Vacuum

UVC-SUPVACS

PHP 9,500.00

Add to registry

More info

The UVCare Super Power UV Vacuum uses UV-C Light technology, pulsating pads, optimized suction and HEPA filter for a better cleaning experience The wavelength of the UV-C lamp is 253.7 nm which can kill up to 99.9% of germs, viruses, microbes, dust mites, and bed bugs. The UV light breaks down the DNA in the microorganisms, the pulsating pads loosen dust mite matter and dirt trapped within fabrics, the optimized suction eliminates particles and the HEPA filter captures common allergens such as dust, pollen, pet dander and dead skin cells.

Uses:

Beds, Mattresses, Pillows, Sofas, Clothing, Fabrics, Bed Sheets, Blankets, Duvets, Upholstery, Carpets, Rugs and Play Mat

Product Features:

  • Powerful UV-C Lamp
  • Medical-grade, high-efficiency HEPA Filter 
  • Two safety wheel switch to prevent exposure to UV-C light
  • Rechargeable Lithium Battery 
  • High Power UV Lamp: 31 cm
  • Rated Power: 100W 
  • Rated Voltage: 18.5W 
  • Vacuum: 5kPa 
  • Noise: 70dB
  • Dust Cup Capacity: 0.5L 
  • Net weight: 1.4kg

How to Use:

  1. Press the power button to turn on the unit
  2. Place the vacuum flat on the bed or surface. This will then turn on the UV-C lamp. You will be able to check  if the UV-C light is working through the light indicator on the machine. 
  3. Glide the vacuum back and forth on your bed or sofa to clean 
  4. There is an overheat protector inside the motor. When the temperature goes up too high, it will automatically shut down to protect the motor and machine. You must rest the machine for about half an hour to restart again. 

How to Clean the Dust Cylinder and HEPA Filter

  1. Turn off the machine 
  2. Carefully pull out the dust cylinder
  3. Use water to clean the dust cylinder. Rinse the filter to clean or use a small brush to remove stubborn dust and dirt. 
  4. Make sure that the dust cylinder and filter is completely dry before installing back to the machine. Never install a wet dust cylinder or wet filter to the machine as this will damage the motor. 
  5. Clean the dust cylinder and filter every after use. This will help to prolong the machine life. 
  6. If the UV Lamp is dirty, air out the dust and use a soft cloth with alcohol to wipe clean 

How to Charge: 

  1. Plug the power adapter to the charging base
  2. Place the vacuum cleaner into the charging base to charge 

Maintenance

  1. There is an overheat protector inside the motor. When the temperature goes up too high, it will automatically shut down to protect the motor and machine. You must rest the machine for about half an hour to restart again. 
  2. Avoid touching the UV lamp with your fingers because the stain will affect the sterilization. 
  3. Regularly clean the HEPA filter and contact your authorized dealer for filter replacement. 
  4. Please do not open or disassemble the machine as this will void your warranty.

Safety 

  1. Ultraviolet radiation does not cause skin cancer or cataract, but it may irritate eyes and skin. Never stare directly and never expose your skin to the UV-C Light. 
  2. Please use a soft, dry cloth to clean the machine. Never use sharp objects to scrape of the dust around it

Reviews

No customer comments for the moment.

Write a review

UVCare Super Power UV Vacuum

UVCare Super Power UV Vacuum

Write a review

30 other products in the same category: